Remove the twist beam cross bolt on both 19. sides. TWIST BEAM BUSH REMOVAL D. Remove twist beam front pivot bush using 1. special tools as shown in below arrangement. NOTE Apply soap water to the bush and the bore • of twist beam assembly before installation. Tightening of RTB on body to be done in • preloading condition. No jacking to be done on beam, avoid oil based lubricant while pushing the bushes in eye. All RTB mounting fasteners to be fitted in • ECIE / Preload condition (applicable wherever bush fasteners). During RTB assembly, • resting/lifting/handling not to done on beam centre portion to avoid damages like notch/ scratch/ chipping/ digging/ bending/ deformation etc. During RTB assembly ensure it is • centralized correctly with BIW so as to have equal rear toe on LH and RH side. FRONT & REAR SUSPENSION 52
RkJQdWJsaXNoZXIy MTIwNTUz