(Wheel speed shall be less than 10 rpm and vehicle RPM shall not available). PINOUT DETAILS CONNECTOR DETAILS REMOVAL Remove steering nacelle assembly. (Refer 1. steering column removal for the procedure in Steering Section). Disconnect the electrical connection to the 2. ESCL. Remove the ESCL mounting bracket’s dome 3. screw (2 qty.). Take out the ESCL unit. 4. FITMENT For fitment follow the removal procedure in reverse. PIN DESCRIPTION 1 Battery_Supply_+12V 2 CAN1-H 3 CAN1-L 4 (Reserve) 5 (Reserve) 6 GND_+12V LV SYSTEM 163
RkJQdWJsaXNoZXIy MTIwNTUz