Vehicle parking Park the vehicle in a safe place. Switch on the indicator signal before turning to park. Apply the parking brake. Ensure that all window glasses are closed and all lamps are turned ‘OFF’. At night, put on the parking lights if required. Remove the key from the ignition switch and lock the vehicle. Block the wheel if parked on a slope. Park Assist Limitations: Park Assist System only assists the driver by giving audible and visual alerts while reverse parking the vehicle. It is not a 100% collision avoiding system. It is completely driver’s responsibility to park the vehicle safely. Park Assist feature works using ultrasonic sound echo technology. Due to which Park Assist performance is not guaranteed in following scenarios. If object have very sharp edge surface, where • surface may divert echoes from sensor reception. If object is mesh fence made up of thin wires, • where echoes can’t be given by the surface. Fast moving objects passes in the sensor field • of detection, where echoes are not processed by the system. If object is made/covered by foam or sponge or • snow where ultrasonic sound signals are absorbed. Sensors covered by mud or external material, • by which ultrasonic signals are either not transmits or receives properly There might be blind spot in Park Assist field of detection close to the rear bumper, where object might have detected once in any of the zone, may miss from the sensor field of detection later. In this case, smaller objects like flower pots, kurb stones, pets or children may not be detected in Yellow or Red warning zones. It’s solely driver responsibility to park the vehicle safely. It is highly recommended to verify through rear/side mirrors of the surroundings before do the reverse parking. Due to any reason, If sensors come out side of bumper or lost its intended fitment position, please do the re fitment. Park Assist System maintenance: Regularly clean sensors located on the bumper. Use smooth cloth or material which can’t make any scratch on the sensor. Don’t apply heavy force while cleaning. Don’t flush water on sensors with heavy pressure. This will damage sensor. Don’t apply external colors, styling stickers, chewing gums, or any material which will stick on the sensors. This will degrade park assist performance. Don’t put any spare tyre or foot rest or number plate which will cover sensor surface. NOTE When parking on a downhill gradient, place the gear lever in ‘Reverse’ position. While parking on uphill gradient, place the gear lever in the ‘1st’ position. Do not use parking brake for braking unless unavoidable circumstances like when service brake is not working properly. The braking distance is considerably longer and the wheels could lock. There is an increased danger of skidding and accidents. WARNING Never leave children unsupervised in the parked vehicle. They could also operate the vehicle’s equipment. There is a risk of an accident and injury. LV SYSTEM 144
RkJQdWJsaXNoZXIy MTIwNTUz