HORN 6. LOCATION Horn is located in front of the car, behind the front bumper, on frame-radiator support. PINOUT DETAILS REMOVAL OF HORN Remove the front bumper. (Refer Body section 1. for removal procedure). Disconnect the connector from horn. 2. Loosen horn mounting fastener & remove Horn. 3. INSPECTION OF HORN: Connect the positive terminal of the horn to battery (+) and negative terminal to battery (-). If a clean and sharp sound is heard, the horn is OK. If no sound is heard, check continuity of the horn coil using a multi-meter. If the coil is OK, check the settings of the setting screw. Adjust the setting screw till a clean and sharp sound is given out. FITMENT For fitment follow the removal procedure in reverse. HORN –TORQUE VALUE TABLE APPLICATION TORQUE Horn MTG Bkt 0.95 to 1.0 Kgfm LV SYSTEM 55
RkJQdWJsaXNoZXIy MTIwNTUz