JUMP LEAD STARTING Use only a battery of same rating & capacity to jump start your vehicle. Position the booster battery close to your vehicle so that the jump leads will reach both batteries. When using a battery of another vehicle, do not let the vehicles touch. Apply the parking brake firmly and keep the gearshift lever in neutral. Turn off all vehicle accessories, except those necessary for safety like hazard warning lamps. Make jump lead connections as follows: Connect one end of the first jump lead to the • positive (+) terminal of the discharged battery. Connect the other end to the positive (+) • terminal of the booster battery. Connect one end of the second jump lead to • the negative (–) terminal of the booster battery. Make the final connection (other end of the • negative terminal) to an un-painted, heavy metal part (i.e. mounting stud / nut) of the vehicle of discharged battery. Start the vehicle with the discharged battery. • Before disconnecting the jumper cables, let the • vehicle is in idle for several minutes. If the booster battery you are using is fitted to • another vehicle, start the vehicle of the vehicle with the booster battery. Run the vehicle in idle at moderate speed. Remove the jump leads in the exact reverse • order in which you connected them. NOTE Do not disconnect the discharged battery from the vehicle. WARNING Never connect the jump lead directly to the negative (–) terminal of the discharged battery. This may lead to an explosion. Do not allow battery electrolyte to come in contact with eyes, skin, fabrics or painted surfaces. The fluid contains acid, which can cause injury and severe damage. Wear protective apparel. Do not inhale any battery gases. Keep children away from batteries. In case if battery acid comes in con-tact with the skin, wash it off immediately with water and seek medical attention. During charging and jump-starting, explosive gases can escape from the battery. There is a risk of an explosion. Particularly avoid fire, open flames, creating sparks and smoking. Ensure there is sufficient ventilation while charging and jump-starting. Do not lean over the battery. Make sure that the positive terminal of a connected battery does not come into contact with vehicle parts. Never place metal objects or tools on a battery. It is important that you observe the described order of the battery terminals when connecting and disconnecting a battery. If you are in doubt, seek assistance from qualified specialist workshop. Never connect or disconnect the battery terminals while the vehicle ignition ON. LV SYSTEM 7
RkJQdWJsaXNoZXIy MTIwNTUz