REMOVAL OF OIL SUMP III. Drain the engine oil in oil pan.(In cold condition) 1. Rotate the engine at 1800 for removal of oil 2. sump. Remove the Oil Sump along with the sealant by 3. using sealant cutting wedge. Remove the Lube Oil Strainer and O-Ring. 4. REMOVAL OF SENSORS IV. Remove Cam Phase Angle Sensor. 1. Remove Crank Angle/RPM Sensor from the 2. Engine Block. Remove Coolant Temperature Sensor. 3. Remove Knock Sensor from Engine Block. 4. SPECIAL TOOL Wedge-Oil Sump sealant cutting 5424 5890 06 09 NOTE Remove Alternator to make crank angle/RPM sensor accessible. Refer alternator removal procedure. ENGINE 1.2L BSVI PHASE-2 122
RkJQdWJsaXNoZXIy MTIwNTUz