TIAGO AMT Gasoline DTC Troubleshooting Guide Version: 2.0 Date: 06-06-2016 Author: Sathi/Anupama Page: 359 of 424 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. 3 Release vehicle to customer after final drive test Check ignition and battery power and ground connections of TCU (check toggling of ign voltage with key ON-OFF). If power healthy -Replace TCU & Recheck the above steps 4 Replace/Rectify the problematic clutch/component Recheck the above steps Replace the relevant component - After the following points by referring TCU parameters using TML diagnostic tool before handing over to customer. and confirm that variable Drive the vehicle through all gears in both Automatic and Manual modes Ensure no DTC is active and Transmission Fault Lamp is OFF. Circuit Schematic Diagram: Component Location & Image:- Connector Location: - Connector View & Information: - Inspection Method: -
RkJQdWJsaXNoZXIy MTIwNTUz