SUPPLEMENTARY RESTRAINT SYSTEM (SRS) 23 torsion bar. The activation of the load limiter does not depend on signal from the ECU. ON VEHICLE REPAIR WARNING Do not attempt to repair, open or apply power (Multimeter) to the RPLL terminals. CAUTION Disconnect the battery negative lead. REMOVAL 1. Disconnect the battery connection. 2. Loosen and remove the lower mounting bolt of seat belt. 3. Remove lower “B” pillar trim. (For procedure, refer “B” pillar trim removal procedure in Body section.) 4. Disconnect the electrical connection of RPLL. 5. Loosen and remove the mounting bolt and take out the RPLL assembly. FITMENT For fitment follow reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz