BODY 28 2.11 DOOR INNER LOCK HANDLE REMOVAL 1. Remove the door trim. (For procedure refer door trim removal process.) 2. Press near the vertical edge of screw cap. 3. Slide and remove screw- cap from rear edge. 4. Loosen and remove the mounting screw of inner handle. 5. Remove one snap and two hooks located behind the front door inner handle lever. 6. Slide the Housing in horizontal / X direction towards vehicle front and remove the lever with Housing assembly from Door Inner panel. Disconnect the cable from inner lock handle connecting inner handle to latch assembly power front. 7. Remove door inner lock handle. FITMENT For fitment follow the reverse procedure of removal. 1. Insert screw cap to tuck in the vertical edge.
RkJQdWJsaXNoZXIy MTIwNTUz