BODY 7 FITMENT 1. Insert the cable in the hook. 2. Also insert the cable cover in the groove. 3. Fix the latch assembly on Radiator support member. 4. Tighten the 2 mounting screws to specified torque 5. Operate the bonnet opening lever from inside and ensure that the bonnet pops up properly, if not loosen the mounting bolts and move the lock in the oval slots provided in the mounting holes, so that it opens properly. 6. Apply the recommended grease to the sliding plates and cable. HOOD LATCH STRIKER REMOVAL 1. Open the bonnet. 2. Loosen and remove two mounting bolts and remove the hood latch striker. FITMENT For fitment follow the reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz