KRYOTEC ENGINE 106 16. Fill the engine with recommended oil (Refer to 04 - Vehicle Quick Reference/Capacities and Recommended Fluids - Specifications). 17. Install the front fascia (Refer to 13 - Frame and Bumpers/Bumpers/FASCIA, Front/Removal and Installation). 18. Install the left front wheelhouse splash shield (Refer to 23- Body/Exterior/SHIELD, Splash/Removal and Installation). 19. Install the right front wheelhouse splash shield (Refer to 23- Body/Exterior/SHIELD, Splash/Removal and Installation). 20. Install the belly pan (Refer to 13- Frame and Bumpers/Under Body Protection/BELLY PAN/Removal and Installation). 21. Remove the support and lower the vehicle. 22. Connect the negative battery cable. J. DIESEL WARNING LIGHT REMOVAL 1. Disconnect and isolate the negative battery cable. 2. Remove the engine cover (Refer to 09 - Engine/ COVER, Engine/Removal and Installation). 3. Remove the nut (1a) and position aside the glow plug module (1b). 4. Disconnect the Powertrain Control Module (PCM) wire harness connectors (1a, 1b).
RkJQdWJsaXNoZXIy MTIwNTUz