AMT KIT 16 7. ON BENCH PROCEDURES: A. OIL TANK REMOVAL AND RE-FITMENT Removal: After unscrewing the OIL TANK CAP and empty the hydraulic oil from the OTK in a canister. Unscrew and remove the two SCREWs M6x20 fixing OTK under PWU body. Unscrew and remove the SCREW M6x20 fixing OTK on PWU body. Unscrew and remove the STUD M8-M6 & WASHER located on the Valve block body. With the Hydraulic System upright to avoid oil draining from PWU, Pull the OTK in vertical direction by hand. Remove the OTK O-ring that normally remains on its seat on PWU, and assemble it in the original position on the OTK, if the tank is reused. INSTALLATION: Insert the OTK outlet port inside the PWU inlet port by moving it vertically towards the mating surface. When the OTK O-ring comes in contact with the PWU seat, push it slowly with appropriate the assembly.
RkJQdWJsaXNoZXIy MTIwNTUz