TA65 Star AMT 34 3. SHIFTER FORKS: 1. 5th gear shifter fork is longer than 3, 4th gear shifter forkend has dowel hole in the center of the boss. 2. 3rd and 4th gear fork has shorter ribs. 3. 1st and 2nd gear shifter fork has the smaller two ribs with shifter finger integrated to fork itself. 4. SYNCHROCONE: 1. 5th/4th/3rd synchrocones are having smaller inner dia and are identical. 2. Each 1st and 2nd synchrocones has three pieces outer cone (sits on engaging gear) intermediate part and inner cone (sits on gear). 5. SHIFTER SHAFTS 1. 1st and 2nd shift has only one hole for shifter fork fitment. 2. 3rd and 4th shifter has two holes for dowel pin with notch at one end for inter lock ball. 3. 5th/Rev. shifter shaft is the longest of all. 4. SHIFTER SLEEVE: 1. 3rd and 4th shifter sleeve. 2. 5thsleeve is having d ach chamfer on dog teeth only on one side. 3. 1st and 2nd shifter sleeve is integral with reverse gear.
RkJQdWJsaXNoZXIy MTIwNTUz