KRYOTEC ENGINE 139 10. Remove the bolts (1a) and the flywheel dust shield (1b). 11. Remove the 1860846000 flywheel holder tool. 12. With the aid of a hydraulic lift, install the engine block to the 1871000000 maintenance stand (1). FITMENT 1. With the aid of a hydraulic lift, remove the engine from the 1871000000 maintenance stand. 2. Place the engine on a suitable platform. 3. Install the flywheel dust cover with the bolts tightened to the proper torque specification (Torque Specifications). 4. Install the flywheel (1) and hand tighten the bolts (3). 5. Install the 1860846000 flywheel holder tool (2). 6. Tighten the flywheel bolts (3) to the proper (Torque Specifications). NOTE The clutch friction disc is identified with a “MOTOR SIDE” marking for correct assembly. To avoid contamination, do not touch the friction disc surface with bare hands. Thoroughly clean the friction disc surface of all corrosion or residue prior to assembly. 7. Position the clutch friction disc and pressure plate (1a) and install the clutch centering tool 2000030800 (1b) from the tool kit and clutch compressor mounting posts 2000040925 (1c) tool kit.
RkJQdWJsaXNoZXIy MTIwNTUz