KRYOTEC ENGINE 114 21. Disconnect the glow plug wire harness connector (1) from each glow plug. 22. Disconnect the fuel pressure sensor wire harness connector (2). 23. Remove the bolt (3) securing the wire harness assembly to the intake manifold and position aside. 24. Disconnect the pressure sensor wire harness connector (4). 25. Remove the bolts (1a) securing the oil vapor pipe (1b) and position aside. 26. Remove the bolt (1) securing the wire harness to the intake manifold. 27. Remove the bolt (2) and the intake manifold support bracket. 28. Remove the bottom mounting stud (1) securing the fuel injection pump. 29. Remove the intake manifold mounting nuts (1).
RkJQdWJsaXNoZXIy MTIwNTUz