KRYOTEC ENGINE 108 K. DIESEL HIGH PRESSURE REMOVAL 1. Disconnect and isolate the negative battery cable. 2. Remove the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 3. Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure). 4. Remove the starter (Refer to 08 - Electrical/Starting/ STARTER/Removal and Installation). 5. Disconnect the oil pressure sensor wire harness connector (1). 6. Remove the oil pressure sensor (2). FITMENT 1. Install the oil pressure sensor (2) and tighten to the proper (Torque Specifications). 2. Connect the oil pressure sensor wire harness connector (1). 3. Install the starter (Refer to 08 - Electrical/Starting/STARTER/Removal and Installation). 4. Remove support and lower the vehicle. 5. Install the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 6. Connect the negative battery cable.
RkJQdWJsaXNoZXIy MTIwNTUz