KRYOTEC ENGINE 95 D. CYLINDER HEAD COVER REMOVAL 1. Disconnect and isolate the negative battery cable. 2. Remove the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 3. Recover the A/C system refrigerant (Refer to 24 - Heating and Air Conditioning/Plumbing/Standard Procedure). 4. Remove the radiator (Refer to 07 - Cooling/Engine/RADIATOR, Engine Cooling/Removal and Installation). 5. Remove the turbocharger (Refer to 09 - Engine/Turbocharger System/TURBOCHARGER/Removal and Installation). 6. Remove the right front wheel (Refer to 22 - Tires and Wheels/Removal and Installation). 7. Remove the timing belt (Refer to 09 - Engine/Valve Timing/BELT, Timing/Removal and Installation). 8. Remove the fuel injectors (Refer to 14 - Fuel System/Fuel Inspection/INJECTOR(S), Fuel/Removal and Installation). 9. Disconnect the fuel quantity solenoid wire harness connector (1). 10. Unscrew the fuel tube fitting (1) at the fuel injection pump. 11. Unscrew the fuel tube fitting at the fuel rail and remove the fuel tube. 12. Disconnect the fuel pressure sensor wire harness connector (2). 13. Unscrews the fuel tube fitting (1) and remove the fuel injection pump to fuel rail. 14. Disconnect the oil pressure regulator wire harness connector (1).
RkJQdWJsaXNoZXIy MTIwNTUz