BRAKE 33 3. Place the new piston on the boot piston assembled, and apply air to the cylinder through inlet port, when boot filled with air press the piston into the cylinder simultaneously cut air supply. NOTE: Before assembling piston, ensure/inspect that the piston is free from damage, dent, spiral mark and any material defects; apply (smear) enough oil/grease on the outer diameter and groove. 3. FRONT BRAKE PAD REMOVAL 1. Jack the vehicle and remove wheel. 2. Loosen and remove the bottom sliding pin bolt. 3. Swing caliper as shown in figure. 4. Remove brake pads. ASSEMBLY: Follow reverse procedure to assemble brake pads.
RkJQdWJsaXNoZXIy MTIwNTUz