STEERING_MANDO 35 9. TUNING DATA SELECTION In order to selection the correct turning data for the vehicle, TML need to be explicitly write the tuning selection data at their EOL, otherwise no motor output from EPAS system, and system will go to error state, the error lamp will be on. This needs to be done in order to verify the selection. Only in the next ignition cycle, the selection will be active. Tuning variant selection for fresh ECU – TML EOL Procedure CONFIGURATION SELECTION According to TML Requirement for ABS / Non - ABS & TCU/Non-TCU shall be selected by diagnostic tools. The corrected selection can be avoid the fault information from the CAN network. DID Value and Description 6214 00 Non ABS & Non TCU Variant 6214 01 Non ABS & TCU Variant 6214 02 ABS & Non TCU Variant 6214 03 ABS & TCU Variant 6215 00 Petrol 6215 01 Diesel
RkJQdWJsaXNoZXIy MTIwNTUz