LV ELECTRICAL SYSTEM 132 4. CABIN FUSE AND RELAY BOX This fuse box is part of main wiring harness. For details refer the below fuse box sticker fitted on steering column lower cover. For other pin out details of fuse box refer the power distribution II circuit schematics. A. LOCATION B. FUSE AND RELAY REPLACEMENT 1. Pry out the fuse box cover on the dashboard panel. 2. Take out the fuse and relay from its base. 3. Check the Fuse/relay. 4. If faulty, replace with same ratting of fuse and relay. C. REPLACEMENT PROCEDURE FOR RELAYS 1. Turn the ignition key to lock position. 2. Check each relay, if faulty replace with same rating relay. 3. If replaced relay of same rating is not working properly, there is probably a serious electrical problem. D. REPLACEMENT PROCEDURE FOR FUSES 1. Turn the ignition key to lock position. 2. Check each fuse and look for broken/open controls link wire inside the fuse. If it is burnt, replace it with one of the spare fuses of same rating. 3. If replaced fuse of same rating burns out then, there is probably a serious electrical problem. Note: Use designated fuses only. E. DIAGNOSTIC CONNECTOR PIN DETAILS PIN NO. DESCRIPTION 8 CAN_H Vehicle CAN 9 CAN_L Vehicle CAN 6 CAN_H Diagnostic / Charging CAN 14 CAN_L Diagnostic / Charging CAN 3 CAN_H EV Powertrain CAN 11 CAN_L EV Powertrain CAN
RkJQdWJsaXNoZXIy MTIwNTUz