LV ELECTRICAL SYSTEM 62 IV. KEY BATTERY REPLACEMENT 1. FOR FLIP KEY Remote control key contains a battery, which is housed under the cover. If red LED on remote flashes for 5 times after operating any button on remote. lt is recommended to replace battery at a TATA MOTORS Authorized Service Centre. You should, however, proceed as follows if you wish to replace the discharged battery yourself: 1. Open the key blade. 2. Press off the battery cover with your thumb or using a flat screwdriver at the points of the arrows. 3. Remove the discharged battery from the key by pressing the battery downwards at the point of the arrow. 4. Insert the new battery. 5. Ensure that the “+" symbol on the battery is facing upwards. The correct polarity is shown on the battery cover. 6. Position the battery cover on the key and press on it until it is heard to lock in place. NOTE Use CR 2032 battery only. An inappropriately disposed battery can be harmful to the environment and human health. Dispose the battery according to your local law(s) and regulation. 2. FOR SMART KEY 1. Remove emergency key from smart key. 2. Move back/unlock key release button.
RkJQdWJsaXNoZXIy MTIwNTUz