ELECTRICAL 17 2. Odometer Odometer Indicates distance traveled by vehicle. The odometer reading does not return to 0 when maximum value is reached, the display will freeze to maximum value. 3. Trip meter A Trip A Indicates distance traveled by vehicle since last reset within the range of 0 km to 9999.9 km with the resolution of 0.1 km. Trip A can be RESET to 0 by pressing Set switch when display is in a TRIP A mode. 4. Trip meter B Trip B Indicates distance traveled by vehicle since last reset within the range of 0 km to 9999.9 km with the resolution of 0.1 km. Trip B can be RESET to 0 by pressing Set switch when display is in a TRIP A mode. 5. Distance to Empty (DTE) DTE indicates approximate distance (km) that the vehicle can travel with available & usable fuel in tank and the driving pattern. This value may differ from the actual driving distance. ‘Refuel’ shall be displayed which indicates that it’s the time to take your vehicle to the nearest petrol pump to fill the fuel. Note: Take your vehicle to authorized TATA MOTORS service station if DTE display’s ‘---‘ The DTE shall update with new value when fuel is added more than approx. 7 Liters The Average fuel consumption and Distance to empty values may vary significantly based on driving conditions, driving habits, and condition of the vehicle and there is no relation with the Odometer updation. The distance to empty value is an estimate of the available driving distance. If low fuel warning comes, fill the fuel immediately regardless the value of displayed DTE. If vehicle is not on level ground or negative of battery has been disturbed, the DTE function may not operate correctly. 6. Average Fuel Economy ‘A’ IPC shall display the “Average Fuel Economy A” corresponding to ‘TRIP A’ with the resolution of 0.1km/l. Average Fuel Economy A shall reset to 0 when Trip A is reset. Average Fuel Economy A shall be displayed as ‘-- .-‘for initial 0.5 km of respective trip. Once 0.5 km distance is covered, Average Fuel Economy A shall be displayed. 7. Average Fuel Economy ‘B’ IPC shall display the “Average Fuel Economy B” corresponding to ‘TRIP B’ with the resolution of 0.1km/l. Average Fuel Economy B shall reset to 0 when Trip B is reset. Average Fuel Economy B shall be displayed as ‘-- .-‘for initial 0.5 km of respective trip. Once 0.5 km distance is covered, Average Fuel Economy B shall be displayed. AFE shall vary frequently as per driving pattern. 8. Average Trip Speed ‘A’ IPC shall display the “Average Trip Speed A” corresponding to ‘TRIP A’ with the resolution of 1 Km/Hr. Average Trip Speed A shall reset to 0 when Trip A is reset. Average Trip Speed A shall be displayed as ‘---‘for initial 0.5 km of respective trip. Once 0.5 km distance is covered, Average Trip Speed A shall be displayed. 9. Average Trip Speed ‘B’ IPC shall display the “Average Trip Speed B”
RkJQdWJsaXNoZXIy MTIwNTUz