BODY 34 6. Disconnect the inner handle cable from the door inner lock handle. 7. Loosen and remove three door latch mounting screw. 8. Disconnect outer handle link from the handle end. 9. Remove the latch. FITMENT For fitment follow reverse procedure of removal. 1.4.19 TAIL GATE REMOVAL 1. Open the tail gate. 2. Remove rear Quarter trims (for removal process refer rear Quarter trims removal process). 3. Remove rear ‘C’ Pillar trims (for removal process refer rear ‘C’ Pillar trim removal process). 4. Disconnect the tail gate all wiring harness located inside the “C” pillar trim and pull out the wiring harness from outside. 5. Remove the top hinge mounting of the tail gate by removing two mounting bolts. Follow the same procedure at the other end and separate the tail gate from the vehicle.
RkJQdWJsaXNoZXIy MTIwNTUz