BODY 31 3. Hold the Door assembly firmly in complete open condition. 4. Accesses the Door Hinge MTG screw and remove four MTG screw from Door side. 5. Slowly pull out the door and pull out the wiring harness carefully which was disconnected earlier. FITMENT For fitment follow the reverse procedure of removal. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regressing interval: 6 Months or 10,000km within. While fixing Hinge MTG Screw, please fix Datum Screw first. Door latch and Striker Setting need to be done For Rattling Noise of side Doors. Door to be maintain 0.5mm under flush NOTE “For Side door Rattling Noise, Door Latch and striker setting need to be done & maintain 1 mm under flush condition.” 1.4.16 REAR DOOR TRIM REMOVAL 1. Open The Door. 2. Pull out Door Pull Bezel 3. Pull out finisher armrest, rear door. 4. Remove mounting screw below Door Pull Bezel
RkJQdWJsaXNoZXIy MTIwNTUz