BODY 26 9. Loosen and remove the mounting screw of inner handle. 10. Insert plastic wedge pin and remove the door trim. 11.Disconnect the window winding connection and remove the switch. NOTE While lifting door trim, care should be taken such that tree clips don’t get damage. Below image gives the location of tree clips on door trim. FITMENT For fitment follow the reverse procedure of removal. NOTE “For Side door Rattling Noise, Door Latch and striker setting need to be done & maintain 1 mm under flush condition.” 1.4.11 DOOR INNER LOCK HANDLE REMOVAL 1. Remove the door trim. (For procedure refer door trim removal process.) 2. Press near the vertical edge of screw cap. 3. Slide and remove screw- cap from rear edge. 4. Loosen and remove the mounting screw of inner handle. 5. Remove one snap and two hooks located behind the front door inner handle lever. 6. Slide the Housing in horizontal / X direction towards vehicle front and remove the lever with Housing assembly from Door Inner panel.
RkJQdWJsaXNoZXIy MTIwNTUz