BRAKES (EPB) 38 6. Loosen coupling nuts and disconnect hydraulic lines attached to TMC. 7. Loosen and remove the mounting nuts and remove the TMC assembly from the vehicle. 8. Remove dashboard lower from driver side. 9. Remove Split pin to disconnect brake pedal from brake booster assembly. 10. Remove clevis pin to separate booster assembly from brake pedal. 11. Loosen and remove booster mounting nuts. 12. Lastly carefully take out the booster assembly from the engine compartment side. FITMENT For fitment follow reverse procedure of removal. NOTE While assembling the booster ensure that the mounting nuts on the control mounting bracket are tightened with the proper sequence to avoid the vacuum loss..
RkJQdWJsaXNoZXIy MTIwNTUz