BRAKES (EPB) 27 5. Pull out the pad slider clip from the carrier. 6. Keep the wooden piece in between the piston and the caliper housing and blow dry compressed air into the caliper gradually through the inlet port (Where banjo bolt is connected). Now you will observe the piston coming out of the caliper gradually. 7. Remove the piston from the caliper housing. 8. Remove the piston boot from the caliper housing. 9. Remove the sealing ring from the groove in the caliper housing. 10. Remove the bleed screw from the caliper housing.
RkJQdWJsaXNoZXIy MTIwNTUz