BRAKES 31 7. Now put the lever in 1st notch & check the wheel rotation, if it is free tighten the adjustment nut till wheel gets locked. 8. Ensure that on releasing parking brake lever both rear wheels are free. 9. Tighten the lock nut which holds the spherical adjuster nut. 10.Operate the parking brake few times to ensure proper operation. 11.Lower the rear axle and remove the chokes from the rear wheel. (Note: Incase with 1st notch setting, if wheels are not free in lever released condition make setting on 2nd notch.) E. BRAKE FLUID DRAINING PROCEDURE 1. Open the bonnet. 2. In case of Manual Transmission, remove the spring band clamp at the CMC end and hold the CMC to reservoir connecting hose in vertically upward position to avoid any further loss of fluid and plug the openings with suitable cap. 3. In case of Auto Transmission reservoir doesn’t have clutch port. 4. Open the bleed screw of front caliper (LHS), connect the bleed tube to the bleed screw and place the other end of bleed tube in the container. Now drain the brake fluid from the hydraulic circuit by pressing the brake pedal repeatedly through its full stroke. NOTE Do not reuse the same drained fluid at the time of bleeding. Follow the same procedure of draining for other three brakes in the sequence given below: Front caliper (RHS) Rear Drum Brake (LHS) Rear Drum Brake (RHS)
RkJQdWJsaXNoZXIy MTIwNTUz