SUSPENSION 43 16.Remove the rear sensor cable mountings on the twist beam axle 17.Remove the screw. 18.Disconnect the bundy pipe/Hose from wheel cylinder. Put rubber dust cap on to the bundy pipe to avoid brake fluid from spilling and contamination. 19.Remove bleed screw. 20.Take out bearing Assembly and brake shoe assembly by removing four allen screws. 21.Support the RTB using lifting trolley 541258900614 & fixture 541258900619. 22.Loosen (Do not remove) Panhard rod both side mounting bolts. 23.Loosen (Do not remove) RTB pivot bush LH/RH cross bolt. 24.Loosen (Do not remove) Damper bottom mounting bolt. 25.Remove the Panhard rod to BIW mounting bolt.
RkJQdWJsaXNoZXIy MTIwNTUz