SUSPENSION 38 19. REMOVAL / ASSEMBLY OF REAR DAMPER ASSEMBLY AND COIL SPRINGS (FOR DRUM BRAKE) 1) Lift the car using two-post lift. 2) Remove Rear Wheel. 3) Position the hydraulic jack below the knuckle of cross beam in such a way that it slightly compresses the spring. 4) Loosen rear Damper Assembly bottom fastener (For Drum Brake). 5) Similarly carry out the above steps for the other side. 6) Remove both the Damper Assembly fasteners holding the torsion beam using hydraulic jack at any one side. 7) Now slowly release and hold the hydraulic jack pressure so that both the coil springs along with top rubber can be pulled out. CAUTION: Do not lower the torsion beam below certain level as the brake hoses will be damaged. 8) Remove Rear Damper Assembly top mounting on Body. 9) Remove Rear Damper Assembly. FITMENT Follow the reverse procedure.
RkJQdWJsaXNoZXIy MTIwNTUz