SUSPENSION 31 5. Unscrew the disc holding screws and remove the disc. 6. Remove Drive shaft. 7. Remove knuckle to LCA Mtg. & disconnect the Lower Control Arm (LCA). 8. Remove Heatshield from stub axle. 9. Dislocate the Stub axle from Driveshaft. 10. Remove hex screw & take out Gen3 Bearing (if applicable). 11. Remove front strut holding Nyloc nut mounting on knuckle & take out knuckle Gen1 Bearing (if applicable). ASSEMBLY Follow the reverse procedure.
RkJQdWJsaXNoZXIy MTIwNTUz