C635 TRANSAXLE 39 14.Disengage the gear selector cable end from the lever by rotating the cable to one side and prying it off in the direction that continues the rotating motion. 15.Remove the gear shifter cable from the bracket by pulling back on the locking collar and lifting the cable out of the bracket. 14.ASSEMBLY GEARSHIFT CONTROL CABLE 1. Before fitment of ball joint at TA end of select & shift cable, Ensure all other fitment of cable and shifter is done properly. 2. Install gear selector and shifter cable mountings on Body. Perform neutral setting as follows 3. Ensure Gear shifter lever is locked in 1st -2nd plane by locking yellow clip placed on top of housing.
RkJQdWJsaXNoZXIy MTIwNTUz