C635 TRANSAXLE 33 14.Install the gear side differential bearing race using and. 15.Install the output and main shafts as a group. 16.Tighten gear shaft rear bearing retention bolt by interlocking shafts using input shaft Lock Plate. a. Tighten output shaft bearing retention bolt by rotating in Anti-clockwise direction b. Tighten Input shaft bearing retention bolt by rotating in clockwise direction 17.Install the 3-4-R gear shifter fork assembly. 18.Install the 1-2-5-6 gear shifter fork assembly. 19.Install the reverse idler gear and the needle bearing. 20.Using a hydraulic press, install the pin to the reverse gear mounting bracket. 21.Install the reverse idler gear assembly. NOTE: The case halves must be assembled within 15 minutes after the application of the anaerobic sealant. Do not allow transmission oil or any other
RkJQdWJsaXNoZXIy MTIwNTUz