C635 TRANSAXLE 30 10.TRANSAXLE ASSEMBLY ON BENCH NOTE: It is not necessary to reestablish preload shim thickness when new bearings are installed. It is only necessary to establish preload shim thickness when a transaxle housing component, gear shaft, or differential is replaced. Transmission and Transfer Case/Manual, Adjustments 1. Install the right and left side differential bearing races using below tools 2751 5890 2621 - Installer, Bearing Cup 2. Install the magnet. 3. Assemble the Race plate to assemble the input & output shaft bearing outer race. 4. Install the new bearing races to the race plate using the following tools: For the Counter shafts bearing race (1 & 2) use 264058903511 - Driver Handle, Universal
RkJQdWJsaXNoZXIy MTIwNTUz