KRYOTEC ENGINE 177 3. The arrows in the diagram illustrate where material can be removed from to equalize the weight. 4. Check that the weight difference between the connecting rods, complete with half-bearings, caps and screws is within the prescribed values (Refer to 09 - Engine/Specifications). 5. The arrows in the diagram illustrate where material can be removed from to equalize the weight. 6. Fit the piston rings on the pistons using the tool. 7. Join the connecting rods to the pistons so that the number printed on connecting rod head (1a) is facing notch (1b) on the piston skirt for the oil jet housing. 8. Fit the pins and secure them using the circlips. 9. Combine the connecting rods relative to the pistons so that the number stamped on the connecting rod head (1a) is facing the notch (1b) formed on the skirt of the piston to the housing of the oil jet. 10. Insert the pins and secure with its snap rings.
RkJQdWJsaXNoZXIy MTIwNTUz