KRYOTEC ENGINE 129 16.Tight the bracket on front pipe bolt mounted on engine housing & apply the specified tightening torque. 17.Tight the pipe in pipe joint clamp nut & apply the specified tightening torque. NOTE Ensure flex bellow should not be pre stress or bend as shown in below figure & also ensure proper orientation of rubber hangers 18.Install engine underbody guard. 19.Install Snorkel and Air filter assembly. 20.Install Engine top cover. 21. Connect battery’s negative terminal. Q. FUEL SYSTEM 1) FUEL TANK REMOVAL 1. Relieve fuel pressure in fuel feed line. 2. Disconnect negative cable at battery. 3. Remove Tail Exhaust pipe. (For removal refer ‘Exhaust Pipe’ removal process). 4. Remove the parking brake cable routed on the tank’s parking brake clamp. 5. Disconnect the fuel filler hose and breather tube Quick connector from filler pipe assembly. 6. Support the fuel tank from below.
RkJQdWJsaXNoZXIy MTIwNTUz