KRYOTEC ENGINE 113 14. Remove the EGR valve and manifold (Refer to 25 - Emissions Control/Exhaust Gas Recirculation, Diesel/ VALVE, Exhaust Gas Recirculation (EGR)/Removal and Installation). 15. Remove the clamp and the oil vapor pipe (1). 16. Remove the bolt (2) securing the oil vapor separator to the intake manifold. 17. Remove the lower bolt (1) securing the engine oil vapor recovery pipe to the engine block. 18. Disconnect the swirl valve actuator wire harness connector (2). 19. Remove the bolt (1) securing the oil recovery pipe to the oil pan. 20. Remove the oil vapor separator assembly complete with O-ring.
RkJQdWJsaXNoZXIy MTIwNTUz