FATC 18 E. LINEAR POWER MODULE In case of FATC a LPM is used to enable the ECU to control the blower speed in smaller increments. It is mounted on evaporator housing. PINOUT PIN NO DESCRIPTION 1 CONTROL 2 DIAGNOSTICS 3 - MOTOR 4 + BAT 5 GND REMOVAL 1. Access the linear power module location from codrivers side. Remove the electrical connection from the module. 2. Remove the mounting screws and take out the module along with the cover. Remove the mounting screw of the module and take out from the cover. REFITMENT For re-fitment, follow reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz