BODY 36 4.21. TAIL GATE TRIM REMOVAL 1. Open the tail gate. 2. Loosen and remove two mounting bolts of tailgate wiper motor cover. 3. Remove tail gate wiper motor cover. 4. Pry out tailgate trim by plastic wedge / fingers and pull out trim gently. NOTE While pulling out the tail gate trim, care should be taken such that tree clips do not get damage. Below image gives location of tree clips on tail gate trim. FITMENT 1. Match Tailgate trim buttons properly with the hole. 2. Press trims gently, ensure its proper fitment. 4.22. ORVM REMOVAL 1. Pry out inside cover plate along with Power mirror switch. 2. Disconnect power mirror switch. 3. Disconnect the electrical connection. 4. Remove mountings screws on ORVM
RkJQdWJsaXNoZXIy MTIwNTUz