BODY 33 7. Loosen and remove three door latch mounting screw. 8. Disconnect outer handle link from the handle end. 9. Remove the latch. FITMENT For fitment follow reverse procedure of removal. 4.19. TAIL GATE REMOVAL 1. Open the tail gate. 2. Disconnect the tail gate wiring harness located inside the “C” pillar trim and pull out the wiring harness from outside. 3. Pull halfway the metallic clip present on ball pin socket from both side and remove the gas balancer. Follow the same procedure at other end. 4. Remove the top hinge mounting of the tail gate by removing two mounting bolts. Follow the same procedure at the other end and separate the tail gate from the vehicle. FITMENT For fitment follow the reverse procedure of removal. NOTE Ensure proper tightening torque is given to the hinges of tailgate. For torque value refer to the tightening torque table.
RkJQdWJsaXNoZXIy MTIwNTUz