BODY 19 4.7. REAR BUMPER REMOVAL (TIAGO) 1. Open the tail gate. 2. Loosen and remove four rear bumper special screw on top side. 3. Loosen and remove all rear bumper screws and bolts which hold the rear bumper from bottom side. 4. Loosen and remove screws which are inside the wheel arch. Follow the same procedure at the other end. 5. Pry out the bumper edges from the wheel arch. 6. Take care that the hood seal is removed for easy removal of bumper. 7. Separate Rear Bumper from Vehicle. 8. Disconnect the electrical connections. FITMENT For fitment follow the reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz