WHEELS AND TYRES 19 C. DEFECTIVE WHEEL ASSEMBLY REPLACEMENT Typical defects that require Wheel assembly replacement: 1. Cracks in the wheel disc face, in particular the bolt hole area and the ventilation holes. 2. Deformations or abnormal imprints in the seats of the bolts / studs fixings. 3. Leaks in tubeless tyres derived by microcracks in the rim or by wear and tear marks on the rim-tyre matching surface. Bent rim flanges (generally due to impacts against obstacles) 4. Wheels with greater run - out may cause vibrations which may ultimately lead to replacement of the wheel assembly. (Refer wheel run out procedure to check wheel run out). NOTE New wheel must be equivalent to the original wheel in terms of load capacity, diameter and rim with offset and mounting configuration. Any repairs to wheels which involves welding or heating are not approved. All damaged wheels should be replaced. It is not allowed to perform any technical modification on wheel assembly. D. SPARE WHEEL REMOVAL PROCEDURE FOR TIAGO 1. Fold the rear seat to access the spare wheel. 2. Unscrew the spare wheel mounting nut. 3. Lift the spare wheel & take out the spare wheel from folded seat side. FITMENT For fitment follow the reverse procedure.
RkJQdWJsaXNoZXIy MTIwNTUz