SUSPENSION 32 PRECAUTION: While assemble / dismantle/ tightening of stab link on vehicle in service, we need to refer following points 1. While tightening the stab link ball joint nut, with an open spanner hold the across flat provided on the ball joint then tighten the nut to the specified torque. 2. During assembly/tightening of stablink, dislocation or damage of the stab link boot should not happen while assembly. 3. In case boot dislocation is observed before/after fitment on vehicle, then do not try to reposition the boot to its original position on stab link, as assembly of retainer ring requires special tools. In such situation replace the stablink with new one. ARB fitment on subframe in ECIE condition
RkJQdWJsaXNoZXIy MTIwNTUz