SUSPENSION 28 C. REMOVAL AND INSTALLATION OF WHEEL HUB REMOVAL: 1. Place the vehicle in the two-post lift and apply parking brake. 2. Remove wheel rim cover. 3. Loosen the wheel mounting bolts. 4. Lift the car till the front wheels are off the ground. 5. Unscrew the wheel mounting bolts and remove the wheel. 6. Unscrew and remove tie rod ball joint nut. 7. Remove tie rod ball joint using puller part No. 2702 5890 4602. 8. Support the lower arm from bottom. 9. Hold hub assembly with holder part No. 2702 5890 3301. 10.The staked portion of the driveshaft nut to be carefully straightened so as to avoid damage to the driveshaft threads. NOTE: Do not reused the old nut. 11. Unscrew drive shaft nut and take out with the thrust washer.
RkJQdWJsaXNoZXIy MTIwNTUz