SUSPENSION 26 B. DISASSEMBLY AND ASSEMBLY OF FRONT STRUT: DISASSEMBLY: Compress the spring with spring Compression tool part No.2702 5890 3202 until the spring tension is released (i.e. becomes free in its seating place).Hold the piston rod by Allen key (A/F: 6 mm) to stop piston rod rotation during loosening of nut. Unscrew nut and dismantle the parts. ASSEMBLY Check the condition of the components before assembly and replace if found Damage. 1.Compress the spring with spring compression tool part No. 2702 5890 3202 to reduce length as done during disassembly as shown in figure 17. 2. Insert the compressed spring on the damper (ensure that the spring end is located at Lug in rubber seat lower, which assembled separately on spring seat). 3.Pull strut piston rod up to full extended length. 4. Insert bump stopper. 5.Assemble dust cover on the spring.( ensure dust cover is properly located on spring) 6.Assemble bearing on the dust cover. 7.Assemble bearing dust cover on bearing.
RkJQdWJsaXNoZXIy MTIwNTUz