TRANSAXLE - TA65 Star 1 1. TECHNICAL SPECIFICATIONS: TYPE Synchromesh on all forward gears and sliding mesh for reverse gear. OIL CAPACITY 1.8 Liters OIL SPECIFICATION GEAR OIL EP80W NEXT GEN SS6582 MODEL TA 65*-5/3.64 (5 speed) with overdrive manual GEAR RATIO GEAR PETROL 1st 3.64 2nd 1.95 3rd 1.27 4th 0.95 5th 0.77 REV. 3.58 FINAL DRIVE RATIOS 4.4 GEAR SHIFT Cable operated floor mounted with international “H” pattern with fifth and reverse inline. 2. PRECAUTIONS: 1. Do not lubricate the Shifter Selector Cables. 2. Ensure that the engaging gears are properly seated over their respective lugs. 3. Ensure that the Shifter finger lugs of transaxle are in line with each other while assembling the top cover assembly. 4. Keep off the oil from clutch disc, flywheel and pressure plate surface. 5. Position properly the release bearing with the Assy clutch release Yoke. 6. Ensure that the oil seals are free from dust particles. 7. Use only recommended transaxle oil. 8. Do not reuse the oil seal, while assembling transaxle. 9. Lubricate drive shaft birfield and tripod joint only with grease gun as referred in manual. 10. Ensure that the boots are not damaged during assembly of driveshaft. 11. Assemble and remove the transaxle component bearings only with special tools. 12. Ensure proper fitment of inter locking balls in the transaxle.
RkJQdWJsaXNoZXIy MTIwNTUz