BODY 57 FIXING WINDSHIELD GLASS Insert Windshield glass Locators in BIW Holes for positioning the glass. After the above preparation mount the glass on the body flange from outside this operation should be done within 15 minutes of the application of sealant on the glass. After mounting the glass, the same has to be pulled towards inside of body with the help of vacuum cups. Slightly tap the glass all around with hand for proper seating of glass mould. Wipe off the excessive spill off of sealant with clean dry rags. Do not use iso-propanol. Keep the vacuum cups pulled for 10 to 12 minutes as mentioned above. Do not drive the car for 2 hours. FIXING TAIL GATE GLASS Repeat the above procedure for Tail gate glass. For Tail gate glass, after fixing, use Tensioner belt for holding the glass with flange. Insert rubber stoppers at bottom edge to push the glass with rubber seal as far as possible. AP. FRONT WHEEL ARCH LINER REMOVAL 1. Remove three mounting screw & one tree clip holding front bumper from bottom. 2. Remove mounting screw located inside the arch liner. 3. Remove Push on Nuts. 4. Remove front wheel arch liner. FITMENT For fitment follow reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz