BRAKE 44 INSTALLATION 1. Align the EPB motor shaft in the spindle (B) & mount the motor. 2. Tighten the EPB motor mounting screw (A). 3. Connect the electrical connector of EPB motor. 4. Fit the wheels and tighten wheel mounting nuts to specified torque. H. REAR WHEEL SPEED SENSOR REMOVAL 1. Position the vehicle on two-post lift. 2. Disconnect electrical connector of wheel speed sensor. WARNING: Take proper precaution while disconnecting the wheel speed sensor from vehicle wiring harness, by not damaging pins of connector. 3. Remove sensor-mounting screw and remove the wheel speed sensor. NOTE: Before replacing wheel speed sensor, carry out diagnosis of wheel speed sensor. (Refer Trouble-shooting and Diagnosis.
RkJQdWJsaXNoZXIy MTIwNTUz