BRAKE 40 3. Connect the ECU harness connector & Motor connector. 4. Reconnect brake lines. Be certain that the brake lines have been connected to the correct ports to ensure proper I - VBAC operation. Tighten the coupling nut to specified torque. 5. Connect the hose pipe TMC reservoir to I - VBAC Unit. 6. Connect the both suction hose of AC system & fill the gas. 7. Locate & mount the Battery tray. 8. Place the battery & assemble the battery strap. 9. Mount the Battery & connect the battery terminal. 10.Bleed the brake system. 11.Clear all fault code memories. 12.Road test vehicle to ensure proper operation of the base and I - VBAC systems. NOTE Software bleeding procedure to be follow if the I - VBAC remove / replace.s Clear all fault code memories.
RkJQdWJsaXNoZXIy MTIwNTUz