HV ELECTRICAL SYSTEM 87 C. CRADLE FITMENT STEP 1 Mate respective assembly faces of motor, inverter and gearbox assy with cradle assy welded structure place; use loctite-243 thread locker and hand tight all 5 bolts. HEX FL SCREW M8X40 TS17130-8.8SS8451-8C, - 3 Nos. HEX FL SCREW M8X25 TS17130 8.8 SS8451-8C, - 2 Nos. STEP 2 Mate bracket assembly RH side motor mount with non drive end assembly faces of motor, inverter and gearbox assembly and with cradle assembly welded structure. Hand tight all 4 bolts (red circle) marked and the 2 vertical bolts (dotted circle) marked. Apply recommended torque to the two vertical bolts and then to the 4 bolts (2) in diagonally opposite fashion. HEX BOLT M10X1.25X45 TS17100 8.8SS8451-8C, - 4 Nos WASHER A10.5 IS5370 ST SS8457S1-S-B, - 4 Nos. SPRING WASHER B10 IS3063 SS8400, - 4 Nos. H/FL BOLT M12X45 TS17130 10.9SS8451S2-YH – 2 Nos STEP 3 Assembled compressor on bracket assembly. CAP SCR M8X110 IS2269 12.9SS8457S1BL-B - 3 Nos.
RkJQdWJsaXNoZXIy MTIwNTUz